The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, length: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, overall_height: 0.715 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S), special_features: CLIP END OF ITEM HAS A THICKNESS OF 0.050 IN. WITH A 0.500 IN.
SPHER. RAD. IN.
This part is cataloged in the U.S. Government catalog under NSN 5340-01-112-8618, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11776341
NSN:5340-01-112-8618 FSC:5340 — Hardware, Commercial CAGE:19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
width
0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
length
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
material
COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
overall_height
0.715 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
special_features
CLIP END OF ITEM HAS A THICKNESS OF 0.050 IN. WITH A 0.500 IN. SPHER. RAD. IN
style_designator
STANDOFF
surface_treatment
TIN OVERALL
material_thickness
0.012 INCHES NOMINAL IN
loop/holding_dimension
0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN
end_item_identification
LAI-M143
surface_treatment_document_and_classification
MIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-01-112-8618
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: STANDOFF
•
LOOP/HOLDING DIMENSION: 0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.012 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.715 INCHES MINIMUM AND 0.735 INCHES MAXIMUM IN
LENGTH
0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-T-10727 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
STYLE DESIGNATOR
STANDOFF
LOOP/HOLDING DIMENSION
0.381 INCHES MINIMUM AND 0.401 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.012 INCHES NOMINAL IN
SPECIAL FEATURES
CLIP END OF ITEM HAS A THICKNESS OF 0.050 IN. WITH A 0.500 IN. SPHER. RAD. IN
SURFACE TREATMENT
TIN OVERALL
WIDTH
0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11776341?
11776341 is a CLIP,SPRING TENSION.
What parts can replace 11776341?
There is 1 known substitute for 11776341: 60087-123. Substitute compatibility should be verified for your specific system.
What is the NSN for 11776341?
11776341 is cataloged in the U.S. Government catalog under NSN 5340-01-112-8618. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.