PartsTable
Technical Data Sheet
Download PDF

1176-107 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

1176-107: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, overall_height: 0.312 INCHES NOMINAL IN, groove_diameter: 0.062 INCHES NOMINAL IN, style_designator: DOUBLE FLANGE, top_flange_width: 0.125 INCHES NOMINAL IN, bottom_flange_width: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-156-2502, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1176-107
NSN: 5305-00-156-2502
NIINs: 001562502, 011387120
FSC: 5305 — Screws
CAGE: 80020 — NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION JOINT BASE JBMDL (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
overall_height0.312 INCHES NOMINAL IN
groove_diameter0.062 INCHES NOMINAL IN
style_designatorDOUBLE FLANGE
top_flange_width0.125 INCHES NOMINAL IN
bottom_flange_width0.250 INCHES NOMINAL IN
bottom_flange_diameter0.312 INCHES NOMINAL IN
outside/top_flange_diameter0.375 INCHES NOMINAL IN
NSN5305-00-156-2502
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1176-107 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.469 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.469 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
AN510-10R7Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1176-107?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1176-107?
1176-107 is a SCREW,MACHINE.
What parts can replace 1176-107?
There is 1 known substitute for 1176-107: AN510-10R7. Substitute compatibility should be verified for your specific system.
What is the NSN for 1176-107?
1176-107 is cataloged in the U.S. Government catalog under NSN 5305-00-156-2502. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1176-107

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.