PartsTable
Technical Data Sheet
Download PDF

117575-1 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

117575-1: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 416 OVERALL, flange_width: 0.297 INCHES NOMINAL IN, thread_class: 2A OVERALL A, thread_length: 0.203 INCHES NOMINAL ROD CONNECTION IN, overall_length: 3.500 INCHES NOMINAL IN, flange_diameter: 0.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-292-3499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117575-1
NSN: 5340-01-292-3499
NIINs: 012923499, 016089871
FSC: 5340 — Hardware, Commercial
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL COMP 416 OVERALL
flange_width0.297 INCHES NOMINAL IN
thread_class2A OVERALL A
thread_length0.203 INCHES NOMINAL ROD CONNECTION IN
overall_length3.500 INCHES NOMINAL IN
flange_diameter0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND OVERALL
nominal_thread_size0.138 INCHES ROD CONNECTION IN
unthreaded_end_depth0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
thread_series_designatorUNF ROD CONNECTION
unthreaded_end_inside_diameter0.0820 INCHES MINIMUM AND 0.0823 INCHES MAXIMUM IN
unthreaded_end_outside_diameter0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
NSN5340-01-292-3499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 117575-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNTHREADED END OUTSIDE DIAMETER: 0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
•
FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
UNTHREADED END DEPTH: 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.203 INCHES NOMINAL ROD CONNECTION IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND OVERALL
•
NOMINAL THREAD SIZE: 0.138 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
UNTHREADED END OUTSIDE DIAMETER0.140 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
FLANGE DIAMETER0.250 INCHES NOMINAL IN
UNTHREADED END DEPTH0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
THREAD LENGTH0.203 INCHES NOMINAL ROD CONNECTION IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A484 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH3.500 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND OVERALL
NOMINAL THREAD SIZE0.138 INCHES ROD CONNECTION IN
FLANGE WIDTH0.297 INCHES NOMINAL IN
THREAD CLASS2A OVERALL A
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 117575-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117575-1?
117575-1 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 117575-1?
117575-1 is cataloged in the U.S. Government catalog under NSN 5340-01-292-3499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117575-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.