PartsTable
Technical Data Sheet
Download PDF

11747322 — STRIKE,CATCH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11747322: STRIKE,CATCH.

The STRIKE,CATCH is a the manufacturer industrial component. Key specifications include height: 0.375 INCHES NOMINAL IN, material: UNABLE TO DECODE, tongue_width: 0.5312 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN, tongue_length: 0.312 INCHES NOMINAL IN, overall_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-016-2274, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11747322
NSN: 5340-01-016-2274
FSC: 5340 — Hardware, Commercial
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
height0.375 INCHES NOMINAL IN
materialUNABLE TO DECODE
tongue_width0.5312 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
tongue_length0.312 INCHES NOMINAL IN
overall_length0.750 INCHES NOMINAL IN
material_thickness0.090 INCHES NOMINAL IN
first_surface_hole_size0.173 INCHES NOMINAL IN
first_surface_hole_quantity2
NSN5340-01-016-2274
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11747322 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TONGUE WIDTH: 0.5312 INCHES NOMINAL IN
•
FIRST SURFACE HOLE SIZE: 0.173 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.090 INCHES NOMINAL IN
•
HEIGHT: 0.375 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
TONGUE LENGTH: 0.312 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TONGUE WIDTH0.5312 INCHES NOMINAL IN
OVERALL LENGTH0.750 INCHES NOMINAL IN
OVERALL WIDTH0.688 INCHES NOMINAL IN
FIRST SURFACE HOLE SIZE0.173 INCHES NOMINAL IN
MATERIAL THICKNESS0.090 INCHES NOMINAL IN
HEIGHT0.375 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
TONGUE LENGTH0.312 INCHES NOMINAL IN
FIRST SURFACE HOLE QUANTITY2
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1240010162274Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11747322?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11747322?
11747322 is a STRIKE,CATCH.
What parts can replace 11747322?
There is 1 known substitute for 11747322: 1240010162274. Substitute compatibility should be verified for your specific system.
What is the NSN for 11747322?
11747322 is cataloged in the U.S. Government catalog under NSN 5340-01-016-2274. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11747322