PartsTable
Technical Data Sheet
Download PDF

11747073 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11747073: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include nut_style: ROUND, nut_diameter: 0.497 INCHES NOMINAL IN, thread_class: 2B, nut_thickness: 0.073 INCHES NOMINAL IN, thread_direction: RIGHT-HAND, drive_point_depth: 0.730 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-047-3638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11747073
NSN: 5310-01-047-3638
FSC: 5310 — Nuts and Washers
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
nut_styleROUND
nut_diameter0.497 INCHES NOMINAL IN
thread_class2B
nut_thickness0.073 INCHES NOMINAL IN
thread_directionRIGHT-HAND
drive_point_depth0.730 INCHES NOMINAL IN
drive_point_width0.960 INCHES NOMINAL IN
small_end_diameter0.434 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
drive_point_quantity4
NSN5310-01-047-3638
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11747073 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DRIVE POINT WIDTH: 0.960 INCHES NOMINAL IN
•
THREAD DIRECTION: RIGHT-HAND
•
NUT DIAMETER: 0.497 INCHES NOMINAL IN
•
DRIVE POINT DEPTH: 0.730 INCHES NOMINAL IN
•
NUT THICKNESS: 0.073 INCHES NOMINAL IN
•
SMALL END DIAMETER: 0.434 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
•
DRIVE POINT QUANTITY: 4
•
NUT STYLE: ROUND
TECHNICAL CHARACTERISTICS
DRIVE POINT WIDTH0.960 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND
NUT DIAMETER0.497 INCHES NOMINAL IN
DRIVE POINT DEPTH0.730 INCHES NOMINAL IN
NUT THICKNESS0.073 INCHES NOMINAL IN
SMALL END DIAMETER0.434 INCHES MINIMUM AND 0.436 INCHES MAXIMUM IN
DRIVE POINT QUANTITY4
NUT STYLEROUND
THREAD CLASS2B
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 11747073?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11747073?
11747073 is a NUT,PLAIN,ROUND.
What is the NSN for 11747073?
11747073 is cataloged in the U.S. Government catalog under NSN 5310-01-047-3638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11747073

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.