PartsTable
Technical Data Sheet
Download PDF

11746425 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11746425: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 AND STEEL COMP 303SE OVERALL, shank_length: 1.0000 INCHES NOMINAL IN, overall_length: 1.2500 INCHES NOMINAL IN, shank_diameter: 0.2500 INCHES NOMINAL IN, undercut_width: 0.0625 INCHES NOMINAL IN, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-026-4735, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11746425
NSN: 5315-01-026-4735
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialSTEEL COMP 303 AND STEEL COMP 303SE OVERALL
shank_length1.0000 INCHES NOMINAL IN
overall_length1.2500 INCHES NOMINAL IN
shank_diameter0.2500 INCHES NOMINAL IN
undercut_width0.0625 INCHES NOMINAL IN
first_end_styleCHAMFERED
second_end_styleSLOTTED
style_designatorUNDERCUT
shoulder_diameter0.1900 INCHES NOMINAL IN
undercut_diameter0.1440 INCHES NOMINAL IN
first_end_locationCHAMFERED END
first_end_slot_depth0.1250 INCHES NOMINAL IN
NSN5315-01-026-4735
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11746425 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.2500 INCHES NOMINAL IN
•
UNDERCUT WIDTH: 0.0625 INCHES NOMINAL IN
•
FIRST END TAPER LENGTH: 0.3120 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.1440 INCHES NOMINAL IN
•
FIRST END LOCATION: CHAMFERED END
•
FIRST END SLOT WIDTH: 0.0625 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 1.0000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.2500 INCHES NOMINAL IN
UNDERCUT WIDTH0.0625 INCHES NOMINAL IN
FIRST END TAPER LENGTH0.3120 INCHES NOMINAL IN
UNDERCUT DIAMETER0.1440 INCHES NOMINAL IN
FIRST END LOCATIONCHAMFERED END
FIRST END SLOT WIDTH0.0625 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
SHANK LENGTH1.0000 INCHES NOMINAL IN
STYLE DESIGNATORUNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11746425?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11746425?
11746425 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 11746425?
11746425 is cataloged in the U.S. Government catalog under NSN 5315-01-026-4735. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11746425

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.