PartsTable
Technical Data Sheet
Download PDF

1174352 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1174352: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include special_features: CLICK SEAL BIO CONTAINMENT LIDS FOR ROUND BUCKETS; END ITEM NSN 6640-01-624-3287; SET OF 4, end_item_identification: 6640-01-624-3287 CENTRIFUGE,LABORATORY, part_name_assigned_by_controlling_agency: LIDS SEALING. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-165-1360, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1174352
NSN: 5330-01-165-1360
NIINs: 011651360, 016252584
FSC: 5330 — Packing and Gasket Materials
CAGE: 34712 — LAKE SHORE SYSTEMS, INC. (USA)
SPECIFICATIONS
special_featuresCLICK SEAL BIO CONTAINMENT LIDS FOR ROUND BUCKETS; END ITEM NSN 6640-01-624-3287; SET OF 4
end_item_identification6640-01-624-3287 CENTRIFUGE,LABORATORY
part_name_assigned_by_controlling_agencyLIDS SEALING
NSN5330-01-165-1360
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1174352 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 8.750 INCHES NOMINAL IN
•
APERTURE DIAMETER: 7.125 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
BOLT CIRCLE DIAMETER: 8.000 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OUTSIDE DIAMETER8.750 INCHES NOMINAL IN
APERTURE DIAMETER7.125 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
BOLT CIRCLE DIAMETER8.000 INCHES NOMINAL IN
HOLE DIAMETER0.438 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
1174342Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
PL-318244 ITEM 14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1174352?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1174352?
1174352 is a GASKET.
What parts can replace 1174352?
There are 2 known substitutes for 1174352: 1174342, PL-318244 ITEM 14. Substitute compatibility should be verified for your specific system.
What is the NSN for 1174352?
1174352 is cataloged in the U.S. Government catalog under NSN 5330-01-165-1360. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1174352

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.