PartsTable
Technical Data Sheet
Download PDF

11726SS2528-7 — HANDLE,BOW

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11726SS2528-7: HANDLE,BOW.

The HANDLE,BOW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, shaft_length: 0.870 INCHES NOMINAL IN, thread_class: 2A A, thread_length: 0.560 INCHES NOMINAL IN, overall_length: 3.500 INCHES NOMINAL IN, handle_clearance: 1.210 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-074-0531, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11726SS2528-7
NSN: 5340-01-074-0531
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
shaft_length0.870 INCHES NOMINAL IN
thread_class2A A
thread_length0.560 INCHES NOMINAL IN
overall_length3.500 INCHES NOMINAL IN
handle_clearance1.210 INCHES NOMINAL IN
special_featuresINCLUDES NUTS AND WASHERS
surface_treatmentPASSIVATE OVERALL
square_shaft_width0.440 INCHES NOMINAL IN
nominal_thread_size0.250 INCHES IN
end_item_identificationAN/ALQ-155; AN/ALT-28
thread_series_designatorUNF
NSN5340-01-074-0531
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11726SS2528-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.560 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
SHAFT LENGTH: 0.870 INCHES NOMINAL IN
•
HANDLE CLEARANCE: 1.210 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.560 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH3.500 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.250 INCHES IN
SHAFT LENGTH0.870 INCHES NOMINAL IN
HANDLE CLEARANCE1.210 INCHES NOMINAL IN
SPECIAL FEATURESINCLUDES NUTS AND WASHERS
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
030-001215-002Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11726SS2528-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11726SS2528-7?
11726SS2528-7 is a HANDLE,BOW.
What parts can replace 11726SS2528-7?
There is 1 known substitute for 11726SS2528-7: 030-001215-002. Substitute compatibility should be verified for your specific system.
What is the NSN for 11726SS2528-7?
11726SS2528-7 is cataloged in the U.S. Government catalog under NSN 5340-01-074-0531. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11726SS2528-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.