PartsTable
Technical Data Sheet
Download PDF

117231 — GEAR,SPUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

117231: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, pitch_diameter: 0.5208 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES, teeth_quantity: 50. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-096-6893, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117231
NSN: 5330-00-096-6893
NIINs: 000966893, 012535538
FSC: 5330 — Packing and Gasket Materials
CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_stylePLAIN, SOLID
bore_stylePLAIN BOTH ENDS
pitch_diameter0.5208 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity50
style_designatorPROTRUDING HUB
attachment_methodMOUNTING HOLE
face_nominal_width0.090 INCHES IN
hub_nominal_diameter0.250 INCHES FIRST END IN
hub_style_designatorPLAIN FIRST END
bore_nominal_diameter0.093 INCHES BOTH ENDS IN
NSN5330-00-096-6893
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 117231 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: COTTON OVERALL
•
HOLE DIAMETER: 0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER2.250 INCHES NOMINAL IN
MATERIALCOTTON OVERALL
HOLE DIAMETER0.375 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
853-34Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 117231?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117231?
117231 is a GEAR,SPUR.
What parts can replace 117231?
There is 1 known substitute for 117231: 853-34. Substitute compatibility should be verified for your specific system.
What is the NSN for 117231?
117231 is cataloged in the U.S. Government catalog under NSN 5330-00-096-6893. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117231

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.