PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1171382
1171382 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: CORK AND RUBBER SYNTHETIC OVERALL, hole_diameter: 0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.812 INCHES NOMINAL IN, overall_length: 1.812 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.219 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-266-6913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1171382
NSN: 5330-00-266-6913
FSC: 5330
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialCORK AND RUBBER SYNTHETIC OVERALL
hole_diameter0.281 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.812 INCHES NOMINAL IN
overall_length1.812 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.219 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.250 INCHES NOMINAL IN
cross-sectional_thickness0.010 INCHES NOMINAL IN
cross-sectional_shape_styleCLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
material_document_and_classificationHH-P-151 FED SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.250 INCHES NOMINAL IN
NSN5330-00-266-6913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1171382 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.250 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.010 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.250 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.250 INCHES NOMINAL IN
OVERALL LENGTH1.812 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.010 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECLOTH AND SYNTHETIC RUBBER, NONMETALLIC MATERIAL
OVERALL WIDTH1.812 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
300-932Interchangeable
interchangeable cross-reference
interchangeable
63014Interchangeable
interchangeable cross-reference
interchangeable
630-1/4 KLEINInterchangeable
interchangeable cross-reference
interchangeable
B107.12 TY1CL2STBInterchangeable
interchangeable cross-reference
interchangeable
B107.12Interchangeable
interchangeable cross-reference
interchangeable
063214Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1171382?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1171382?
1171382 is a GASKET.
What parts can replace 1171382?
There are 8 known substitutes for 1171382: 300-932, 63014, 630-1/4 KLEIN and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1171382?
1171382 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-266-6913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1171382

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026