PartsTable
Technical Data Sheet
PartsTable / MRO / 11710
11710 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: STEEL OVERALL, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, head_style: HEXAGON, seat_angle: 37.0 DEGREES FIRST END, body_length: 0.156 INCHES MAXIMUM IN, head_height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-009-7739, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 11710
NSN: 5305-00-009-7739
FSC: 5305
CAGE: 12344 — TALLY PRINTER CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
head_styleHEXAGON
seat_angle37.0 DEGREES FIRST END
body_length0.156 INCHES MAXIMUM IN
head_height0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
blade_length2.000 INCHES NOMINAL IN
thread_class2A A
body_diameter0.365 INCHES MAXIMUM IN
head_diameter0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length0.507 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN
overall_length2.780 INCHES NOMINAL IN
NSN5305-00-009-7739
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11710 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD DIAMETER: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
THREAD LENGTH: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 40
•
HEAD STYLE: FILLISTER
•
MATERIAL: PLASTIC POLYAMIDE NYLON OVERALL
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
HEAD DIAMETER0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
THREAD LENGTH0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH40
HEAD STYLEFILLISTER
MATERIALPLASTIC POLYAMIDE NYLON OVERALL
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
LOCKING FEATURESTRIP THREADS
HEAD HEIGHT0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
717-004865Interchangeable
interchangeable cross-reference
interchangeable
708Interchangeable
interchangeable cross-reference
interchangeable
1321-0708Interchangeable
interchangeable cross-reference
interchangeable
00618Interchangeable
interchangeable cross-reference
interchangeable
11710Interchangeable
interchangeable cross-reference
interchangeable
11-710-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11710?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11710?
11710 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 11710?
There are 19 known substitutes for 11710: 717-004865, 708, 1321-0708 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11710?
11710 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-009-7739. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11710

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026