PartsTable
Technical Data Sheet
Download PDF

117071 — GASKET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

117071: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, end_item_identification: LOGISTICS SUPPORT VESSEL (LSV), material_document_and_classification: ASTM B438 GR 1 TY 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-441-4038, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117071
NSN: 5310-00-441-4038
NIINs: 004414038, 011361617, 012664068
FSC: 5310 — Nuts and Washers
CAGE: R1120 — SATAIR A/S (DNK)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
end_item_identificationLOGISTICS SUPPORT VESSEL (LSV)
material_document_and_classificationASTM B438 GR 1 TY 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-441-4038
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 117071 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 1010 OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.188 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
•
THICKNESS: 0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL COMP 1010 OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.188 INCHES MINIMUM AND 0.193 INCHES MAXIMUM IN
THICKNESS0.015 INCHES MINIMUM AND 0.016 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
FF-W-92BReference document
Same NSN cross-reference
Reference document — Identification reference
769369-3Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 117071?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117071?
117071 is a GASKET.
What parts can replace 117071?
There are 2 known substitutes for 117071: FF-W-92B, 769369-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 117071?
117071 is cataloged in the U.S. Government catalog under NSN 5310-00-441-4038. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117071

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.