PartsTable
Technical Data Sheet
Download PDF

117029PC365 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

117029PC365: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: IRON OVERALL, thickness: 0.1875 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN, hole_diameter: 0.624 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, surface_finish: 63.0 MICROINCHES OUTER, overall_diameter: 0.968 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-274-9571, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
117029PC365
NSN: 5310-00-274-9571
FSC: 5310 — Nuts and Washers
CAGE: 830Q4 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS-WRIGHT STEAM AND AIR SOLUTIONS DIV STEAM AND AIR SOLUTIONS (USA)
SPECIFICATIONS
materialIRON OVERALL
thickness0.1875 INCHES MINIMUM AND 0.1880 INCHES MAXIMUM IN
hole_diameter0.624 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
surface_finish63.0 MICROINCHES OUTER
overall_diameter0.968 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-I-652,CL35 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-274-9571
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 117029PC365 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES BOTTOM
•
OVERALL DIAMETER: 0.968 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-I-652,CL35 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES BOTTOM
SURFACE FINISH63.0 MICROINCHES INNER
SURFACE FINISH63.0 MICROINCHES OUTER
SURFACE FINISH32.0 MICROINCHES TOP
OVERALL DIAMETER0.968 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-I-652,CL35 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
MATERIALIRON OVERALL
CENTER HOLE SHAPE STYLEROUND
SUBSTITUTES & CROSS-REFERENCES 9
117515PC365Reference document
Same NSN cross-reference
Reference document — Secondary reference
1589BReference document
Same NSN cross-reference
Reference document — Secondary reference
116929PC365Reference document
Same NSN cross-reference
Reference document — Secondary reference
116729PC365Reference document
Same NSN cross-reference
Reference document — Secondary reference
117529PC365Reference document
Same NSN cross-reference
Reference document — Secondary reference
107529PC365Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 117029PC365?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 117029PC365?
117029PC365 is a WASHER,FLAT.
What parts can replace 117029PC365?
There are 9 known substitutes for 117029PC365: 117515PC365, 1589B, 116929PC365 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 117029PC365?
117029PC365 is cataloged in the U.S. Government catalog under NSN 5310-00-274-9571. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 117029PC365

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.