PartsTable
Technical Data Sheet
Download PDF

11697053 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11697053: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 4340 OVERALL, nut_style: ROUND, nut_diameter: 2.182 INCHES MINIMUM AND 2.187 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN, thread_series: UN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-832-6496, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11697053
NSN: 5310-00-832-6496
FSC: 5310 — Nuts and Washers
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
materialSTEEL COMP 4140 OR STEEL COMP 4340 OVERALL
nut_styleROUND
nut_diameter2.182 INCHES MINIMUM AND 2.187 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
thread_seriesUN
hardness_rating34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle45.0 DEGREES NOMINAL NUT
drive_point_depth0.155 INCHES NOMINAL IN
drive_point_width0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
surface_treatmentPHOSPHATE OVERALL
NSN5310-00-832-6496
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11697053 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UN
•
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
•
DRIVE POINT WIDTH: 0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 1.875 INCHES IN
•
NUT DIAMETER: 2.182 INCHES MINIMUM AND 2.187 INCHES MAXIMUM IN
•
DRIVE POINT DEPTH: 0.155 INCHES NOMINAL IN
•
NUT THICKNESS: 0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
THREAD SERIESUN
HARDNESS RATING34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM
DRIVE POINT WIDTH0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE1.875 INCHES IN
NUT DIAMETER2.182 INCHES MINIMUM AND 2.187 INCHES MAXIMUM IN
DRIVE POINT DEPTH0.155 INCHES NOMINAL IN
NUT THICKNESS0.310 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
SURFACE TREATMENTPHOSPHATE OVERALL
COUNTERSINK ANGLE45.0 DEGREES NOMINAL NUT
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11697053?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11697053?
11697053 is a NUT,PLAIN,ROUND.
What is the NSN for 11697053?
11697053 is cataloged in the U.S. Government catalog under NSN 5310-00-832-6496. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11697053