116952 — SPACER,SLEEVE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

116952: SPACER,SLEEVE.

The SPACER,SLEEVE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, head_height: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN, hole_diameter: 0.062 INCHES NOMINAL IN, thread_length: 0.570 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-150-9517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

116952

NSN: 5305-00-150-9517
NIINs: 001509517, 013616664
FSC: 5305 — Screws
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)

SPECIFICATIONS

head_style	FILLISTER
head_height	0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM IN
hole_diameter	0.062 INCHES NOMINAL IN
hole_quantity	1
thread_length	0.570 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
screw_material	STEEL COMP 8630
fastener_length	0.750 INCHES NOMINAL IN
hardness_rating	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
thread_direction	RIGHT-HAND
internal_drive_style	CROSS RECESS TYPE 1
NSN	5305-00-150-9517

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN

•

SCREW SURFACE TREATMENT: CADMIUM

•

FASTENER LENGTH: 0.750 INCHES NOMINAL IN

•

SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE

•

THREAD LENGTH: 0.570 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN

•

HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM

•

NOMINAL THREAD DIAMETER: 0.250 INCHES IN

•

HEAD STYLE: FILLISTER

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM IN
SCREW SURFACE TREATMENT	CADMIUM
FASTENER LENGTH	0.750 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
THREAD LENGTH	0.570 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
HARDNESS RATING	26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
NOMINAL THREAD DIAMETER	0.250 INCHES IN
HEAD STYLE	FILLISTER
THREAD DIRECTION	RIGHT-HAND
SCREW MATERIAL	STEEL COMP 8630

SUBSTITUTES & CROSS-REFERENCES 3

AN502-416-12Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MILS7839Reference document

Same NSN cross-reference

Reference document — Secondary reference

91145Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 116952?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 116952?

116952 is a SPACER,SLEEVE.

What parts can replace 116952?

There are 3 known substitutes for 116952: AN502-416-12, MILS7839, 91145. Substitute compatibility should be verified for your specific system.

What is the NSN for 116952?

116952 is cataloged in the U.S. Government catalog under NSN 5305-00-150-9517. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

116952 — SPACER,SLEEVE

Request a Quote — 116952