1169107-2 — ADAPTER,GUN MOUNTING

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

1169107-2: ADAPTER,GUN MOUNTING.

The ADAPTER,GUN MOUNTING is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, point_style: FLAT, thread_class: 3A A, head_diameter: 0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.203 INCHES NOMINAL IN, fastener_length: 0.565 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 1005-00-804-2880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

1169107-2

NSN: 1005-00-804-2880
NIINs: 008042880, 013462385
FSC: 1005 — Guns, Through 30mm
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)

SPECIFICATIONS

head_style	FLAT COUNTERSUNK
point_style	FLAT
thread_class	3A A
head_diameter	0.238 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length	0.203 INCHES NOMINAL IN
fastener_length	0.565 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatment	PASSIVATE OVERALL
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.138 INCHES IN
first_diameter_from_head	0.099 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
NSN	1005-00-804-2880

COMPONENT DIAGRAM

KEY FEATURES

•

GENERAL CHARACTERISTICS ITEM DESCRIPTION: ELEMENT WILL BE EXERCISED 10 TIMES BY COMPRESSING ELEMENT FROM FREE HT.TO THE HT. CORRESPONDING TO A 400 LB. LOAD,AFTER EXERCISING ELEMENT WILL BE PRELOADED 60 LBS. +/- 5 LBS. AND CAP WILL BE HAND TIGHTENED FLUSH TO WASHER;CAP AND SHAFT WILL BE DRILLED AND PINNED; 60 LBS. +/- 5 LBS. PRELOAD WILL BEMET AFTER CAP HAS BEEN PINNED TO SHAFT,EXCEPT THAT A MAX. DEFLECTION OF 0.003 IN. IS ALLOWABLE PRIOR TO REACHING THE 60 LBS. +/- 5 LBS. PRELOAD; CONSISTS OF CAP-1,P/N 11686362; PIN-1,P/N MS16562-100; WASHER-2,P/N 11686364; SHAFT-1,P/N 11686361; ELEMENT-1,P/N 11698924 LBS

TECHNICAL CHARACTERISTICS

GENERAL CHARACTERISTICS ITEM DESCRIPTION

ELEMENT WILL BE EXERCISED 10 TIMES BY COMPRESSING ELEMENT FROM FREE HT.TO THE HT. CORRESPONDING TO A 400 LB. LOAD,AFTER EXERCISING ELEMENT WILL BE PRELOADED 60 LBS. +/- 5 LBS. AND CAP WILL BE HAND TIGHTENED FLUSH TO WASHER;CAP AND SHAFT WILL BE DRILLED AND PINNED; 60 LBS. +/- 5 LBS. PRELOAD WILL BEMET AFTER CAP HAS BEEN PINNED TO SHAFT,EXCEPT THAT A MAX. DEFLECTION OF 0.003 IN. IS ALLOWABLE PRIOR TO REACHING THE 60 LBS. +/- 5 LBS. PRELOAD; CONSISTS OF CAP-1,P/N 11686362; PIN-1,P/N MS16562-100; WASHER-2,P/N 11686364; SHAFT-1,P/N 11686361; ELEMENT-1,P/N 11698924 LBS

END ITEM IDENTIFICATION

ARMAMENT SUBSYSTEM,HELICOPTER,7.62 MM. MACHINE GUN-2.75 IN. ROCKET LAUNCHER,NSN 1090-00-923-5971 MM

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — complete disassembly

Ready to buy 1169107-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 1169107-2?

1169107-2 is a ADAPTER,GUN MOUNTING.

What is the NSN for 1169107-2?

1169107-2 is cataloged in the U.S. Government catalog under NSN 1005-00-804-2880. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

1169107-2 — ADAPTER,GUN MOUNTING

Request a Quote — 1169107-2