PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 116903
116903 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,EYE,NONROTATING SHAFT is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: STEEL PER QQ-S-741,GRADE A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-495-1757, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
116903
NSN: 5330-00-495-1757
FSC: 5330
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
general_characteristics_item_descriptionSTEEL PER QQ-S-741,GRADE A
NSN5330-00-495-1757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 116903 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: U
•
CROSS-SECTIONAL THICKNESS: 0.046 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.305 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
MATERIAL: RUBBER OVERALL
•
CROSS-SECTIONAL HEIGHT: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEU
CROSS-SECTIONAL THICKNESS0.046 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.305 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
MATERIALRUBBER OVERALL
CROSS-SECTIONAL HEIGHT0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
NNNP00350Interchangeable
interchangeable cross-reference
interchangeable
7060Interchangeable
interchangeable cross-reference
interchangeable
MS35980-5Interchangeable
interchangeable cross-reference
interchangeable
16328Interchangeable
interchangeable cross-reference
interchangeable
318974 FIND 29Interchangeable
interchangeable cross-reference
interchangeable
318974Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 116903?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 116903?
116903 is a BRACKET,EYE,NONROTATING SHAFT.
What parts can replace 116903?
There are 10 known substitutes for 116903: NNNP00350, 7060, MS35980-5 and 7 more. Substitute compatibility should be verified for your specific system.
Is 116903 still available?
116903 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 116903

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026