PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1168857-3
1168857-3 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, material: STEEL COMP XM-12 OVERALL, overall_length: 1.370 INCHES NOMINAL IN, effective_length: 1.210 INCHES NOMINAL IN, special_features: HEAT TREATMENT: ANNEALED AND TEMPERED, style_designator: GROOVE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-163-9553, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1168857-3
NSN: 5315-01-163-9553
FSC: 5315
CAGE: 6K4C8 — GOODRICH CORPORATION (USA)
SPECIFICATIONS
diameter0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
materialSTEEL COMP XM-12 OVERALL
overall_length1.370 INCHES NOMINAL IN
effective_length1.210 INCHES NOMINAL IN
special_featuresHEAT TREATMENT: ANNEALED AND TEMPERED
style_designatorGROOVE
undercut_diameter0.288 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
end_item_identificationAH-64 HELICOPTER
nondefinitive_spec/std_dataH1025 PER AMS-H-6875 CONDITION
material_document_and_classificationAMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyPIN, GROOVED, HEADLESS, WHEEL LOCK, TAIL LANDING GEAR
NSN5315-01-163-9553
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1168857-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDERCUT DIAMETER: 0.288 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
•
DIAMETER: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP XM-12 OVERALL
•
STYLE DESIGNATOR: GROOVE
TECHNICAL CHARACTERISTICS (FLIS)
UNDERCUT DIAMETER0.288 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYPIN, GROOVED, HEADLESS, WHEEL LOCK, TAIL LANDING GEAR
DIAMETER0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONAH-64 HELICOPTER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5659 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-12 OVERALL
OVERALL LENGTH1.370 INCHES NOMINAL IN
STYLE DESIGNATORGROOVE
EFFECTIVE LENGTH1.210 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAH1025 PER AMS-H-6875 CONDITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
1168857Interchangeable
interchangeable cross-reference
interchangeable
16135Interchangeable
interchangeable cross-reference
interchangeable
1168857-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1168857-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1168857-3?
1168857-3 is a PIN,GROOVED,HEADLESS.
What parts can replace 1168857-3?
There are 3 known substitutes for 1168857-3: 1168857, 16135, 1168857-5. Substitute compatibility should be verified for your specific system.
What is the NSN for 1168857-3?
1168857-3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-01-163-9553. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1168857-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026