PartsTable
Technical Data Sheet
Download PDF

11687588 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11687588: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.086 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN, material: STEEL CORROSION RESISTING OVERALL, head_style: BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE), special_features: 6-32UNC-2B TAPPED IN CHAMFER END, pin_head_diameter: 0.350 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, surface_treatment: OXIDE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-824-0770, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11687588
NSN: 5315-00-824-0770
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
height0.086 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
materialSTEEL CORROSION RESISTING OVERALL
head_styleBUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE)
special_features6-32UNC-2B TAPPED IN CHAMFER END
pin_head_diameter0.350 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
surface_treatmentOXIDE OVERALL
NSN5315-00-824-0770
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11687588 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN HEAD DIAMETER: 0.350 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
HEAD STYLE: BUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE)
•
HEIGHT: 0.086 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
•
SURFACE TREATMENT: OXIDE OVERALL
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
PIN HEAD DIAMETER0.350 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
HEAD STYLEBUTTON (RATIO OF HGTH/CRRG OVER 0.190 TO 0.300 INCLUSIVE)
HEIGHT0.086 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
SPECIAL FEATURES6-32UNC-2B TAPPED IN CHAMFER END
SURFACE TREATMENTOXIDE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
717897-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11687588?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11687588?
11687588 is a PIN,STRAIGHT,HEADED.
What parts can replace 11687588?
There is 1 known substitute for 11687588: 717897-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 11687588?
11687588 is cataloged in the U.S. Government catalog under NSN 5315-00-824-0770. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11687588