PartsTable / COMPONENT / 116867
116867
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT B, case_style: SQUARE, seal_width: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN, housing_bore_diameter: 2.125 INCHES NOMINAL IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 1.375 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-641-0994, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
116867
NSN: 5330-00-641-0994 FSC: 5330 CAGE: 64104 — DRESSER, LLC (USA)
SPECIFICATIONS
material RUBBER SYNTHETIC SEALING ELEMENT B case_style SQUARE seal_width 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN housing_bore_diameter 2.125 INCHES NOMINAL IN sealing_element_style ANGULAR accommodated_shaft_diameter 1.375 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 2000 FEET PER MINUTE FT NSN 5330-00-641-0994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 116867
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: LEATHER SEALING ELEMENT A
• SEAL WIDTH: 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT DIAMETER: 1.375 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
• HOUSING BORE DIAMETER: 2.125 INCHES NOMINAL IN
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL LEATHER SEALING ELEMENT A CASE STYLE SQUARE SEAL WIDTH 0.406 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN ACCOMMODATED SHAFT DIAMETER 1.375 INCHES NOMINAL IN MATERIAL RUBBER SYNTHETIC SEALING ELEMENT B ACCOMMODATED SHAFT MAXIMUM RATED SPEED 2000 FEET PER MINUTE FT HOUSING BORE DIAMETER 2.125 INCHES NOMINAL IN SEALING ELEMENT STYLE ANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
50135 Interchangeable interchangeable cross-reference
interchangeable
71487-B55 Interchangeable interchangeable cross-reference
interchangeable
13641 Interchangeable interchangeable cross-reference
interchangeable
ASTM B221 Interchangeable interchangeable cross-reference
interchangeable
60-2046 Interchangeable interchangeable cross-reference
interchangeable
3N4A Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 116867?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 116867?
116867 is a SEAL,PLAIN ENCASED.
What parts can replace 116867?
There are 18 known substitutes for 116867: 50135, 71487-B55, 13641 and 15 more. Substitute compatibility should be verified for your specific system.
Is 116867 still available?
116867 is currently cancelled.