PartsTable
Technical Data Sheet
Download PDF

1168104 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1168104: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include fork_depth: 2.2600 INCHES NOMINAL IN, hole_shape: SLOTTED, slot_width: 1.5000 INCHES NOMINAL IN, slot_length: 2.2600 INCHES NOMINAL IN, shank_length: 3.3450 INCHES MINIMUM AND 3.3550 INCHES MAXIMUM IN, thread_class: 3A ROD END A. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-465-3564, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1168104
NSN: 5340-01-465-3564
FSC: 5340 — Hardware, Commercial
CAGE: 17576 — GOODRICH CORP DBA GOODRICH CORP (USA)
SPECIFICATIONS
fork_depth2.2600 INCHES NOMINAL IN
hole_shapeSLOTTED
slot_width1.5000 INCHES NOMINAL IN
slot_length2.2600 INCHES NOMINAL IN
shank_length3.3450 INCHES MINIMUM AND 3.3550 INCHES MAXIMUM IN
thread_class3A ROD END A
overall_width2.0000 INCHES NOMINAL IN
thread_length2.2600 INCHES NOMINAL ROD END IN
shank_diameter1.3120 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM IN
fork_span_width1.5000 INCHES NOMINAL IN
special_featuresHARDNESS (VENDOR DRAWING NOTE 2), HEAT TREAT
thread_directionRIGHT-HAND ROD END
NSN5340-01-465-3564
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1168104 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.3120 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM IN
•
FORK SPAN WIDTH: 1.5000 INCHES NOMINAL IN
•
THREAD LENGTH: 2.2600 INCHES NOMINAL ROD END IN
•
SHANK LENGTH: 3.3450 INCHES MINIMUM AND 3.3550 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: FEAT
•
THREAD DIRECTION: RIGHT-HAND ROD END
•
HOLE SHAPE: SLOTTED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.3120 INCHES MINIMUM AND 1.3220 INCHES MAXIMUM IN
FORK SPAN WIDTH1.5000 INCHES NOMINAL IN
THREAD LENGTH2.2600 INCHES NOMINAL ROD END IN
SHANK LENGTH3.3450 INCHES MINIMUM AND 3.3550 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONFEAT
OVERALL WIDTH2.0000 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD END
HOLE SHAPESLOTTED
SPECIAL FEATURESHARDNESS (VENDOR DRAWING NOTE 2), HEAT TREAT
THREAD CLASS3A ROD END A
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1168104-103Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Demilitarization required — critical (Q)
Ready to buy 1168104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1168104?
1168104 is a CLEVIS,ROD END.
What parts can replace 1168104?
There is 1 known substitute for 1168104: 1168104-103. Substitute compatibility should be verified for your specific system.
What is the NSN for 1168104?
1168104 is cataloged in the U.S. Government catalog under NSN 5340-01-465-3564. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1168104

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.