PartsTable
Technical Data Sheet
Download PDF

11675891 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11675891: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hole_diameter: 0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.280 INCHES MINIMUM AND 6.340 INCHES MAXIMUM IN, aperture_width: 5.200 INCHES MINIMUM AND 5.260 INCHES MAXIMUM IN, overall_length: 10.280 INCHES MINIMUM AND 10.340 INCHES MAXIMUM IN, aperture_length: 9.200 INCHES MINIMUM AND 9.260 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-078-8575, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11675891
NSN: 5330-00-078-8575
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hole_diameter0.225 INCHES MINIMUM AND 0.245 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.280 INCHES MINIMUM AND 6.340 INCHES MAXIMUM IN
aperture_width5.200 INCHES MINIMUM AND 5.260 INCHES MAXIMUM IN
overall_length10.280 INCHES MINIMUM AND 10.340 INCHES MAXIMUM IN
aperture_length9.200 INCHES MINIMUM AND 9.260 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width3.150 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length3.574 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-078-8575
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11675891 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 5.200 INCHES MINIMUM AND 5.260 INCHES MAXIMUM IN
•
APERTURE LENGTH: 9.200 INCHES MINIMUM AND 9.260 INCHES MAXIMUM IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.574 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH10.280 INCHES MINIMUM AND 10.340 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH6.280 INCHES MINIMUM AND 6.340 INCHES MAXIMUM IN
APERTURE WIDTH5.200 INCHES MINIMUM AND 5.260 INCHES MAXIMUM IN
APERTURE LENGTH9.200 INCHES MINIMUM AND 9.260 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.574 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.150 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALRUBBER OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11675891?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11675891?
11675891 is a GASKET.
What is the NSN for 11675891?
11675891 is cataloged in the U.S. Government catalog under NSN 5330-00-078-8575. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11675891

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.