PartsTable
Technical Data Sheet
Download PDF

116734 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

116734: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 34.00 MILLIMETERS NOMINAL MM, load_direction: ANGULAR, surface_finish: GROUND, special_features: ANGULARITY GREATER THAN 25 DEG. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-8012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 116734
NSN: 3110-00-156-8012
NIINs: 001568012, 004652976, 009573263
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width34.00 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
special_featuresANGULARITY GREATER THAN 25 DEG
style_designatorCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
end_item_identificationACFT ENG R1830
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
bearing_preload_designationLIGHT
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-00-156-8012
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 116734 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
BEARING PRELOAD DESIGNATION: LIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
BEARING PRELOAD DESIGNATIONLIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RINGS, NON-SEPARABLE, BACK TO BACK MOUNTING
OVERALL WIDTH34.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONANGULAR
SPECIAL FEATURESANGULARITY GREATER THAN 25 DEG
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
SUBSTITUTES & CROSS-REFERENCES 7
7305DReference document
Same NSN cross-reference
Reference document — Secondary reference
7305DBE100A001A14S0000AReference document
Same NSN cross-reference
Reference document — Secondary reference
A1414-35Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
7305DBE100A001A1850000AReference document
Same NSN cross-reference
Reference document — Secondary reference
289955-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
7305DBMILG3278Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 116734?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 116734?
116734 is a BEARING,BALL,ANNULAR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 116734?
There are 7 known substitutes for 116734: 7305D, 7305DBE100A001A14S0000A, A1414-35 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 116734?
116734 is cataloged in the U.S. Government catalog under NSN 3110-00-156-8012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 116734

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.