PartsTable
Technical Data Sheet
Download PDF

11669053 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11669053: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.300 INCHES NOMINAL IN, length: 9.1205 INCHES NOMINAL IN, material: STEEL OVERALL, surface_treatment: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL, loop_opening_width: 0.687 INCHES NOMINAL IN, material_thickness: 0.1205 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-117-3793, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11669053
NSN: 5340-01-117-3793
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width0.300 INCHES NOMINAL IN
length9.1205 INCHES NOMINAL IN
materialSTEEL OVERALL
surface_treatmentCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
loop_opening_width0.687 INCHES NOMINAL IN
material_thickness0.1205 INCHES NOMINAL IN
distance_from_loop_center_to_end8.500 INCHES NOMINAL IN
material_document_and_classificationQQ-W-428,TYPE 2,CLASS 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
NSN5340-01-117-3793
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11669053 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 9.1205 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-428,TYPE 2,CLASS 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.1205 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 8.500 INCHES NOMINAL IN
•
LOOP OPENING WIDTH: 0.687 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
•
WIDTH: 0.300 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH9.1205 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-428,TYPE 2,CLASS 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.1205 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END8.500 INCHES NOMINAL IN
LOOP OPENING WIDTH0.687 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
WIDTH0.300 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
10086769Reference document
Same NSN cross-reference
Reference document — Informative reference only
5340011173793Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11669053?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11669053?
11669053 is a CLIP,SPRING TENSION.
What parts can replace 11669053?
There are 2 known substitutes for 11669053: 10086769, 5340011173793. Substitute compatibility should be verified for your specific system.
What is the NSN for 11669053?
11669053 is cataloged in the U.S. Government catalog under NSN 5340-01-117-3793. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11669053

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.