PartsTable
Technical Data Sheet
Download PDF

11660634 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11660634: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 1.620 INCHES NOMINAL IN, hole_diameter: 1.125 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, overall_height: 5.840 INCHES NOMINAL IN, fork_span_width: 1.840 INCHES NOMINAL IN, surface_treatment: ENAMEL OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-051-3609, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11660634
NSN: 5340-01-051-3609
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius1.620 INCHES NOMINAL IN
hole_diameter1.125 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
overall_height5.840 INCHES NOMINAL IN
fork_span_width1.840 INCHES NOMINAL IN
surface_treatmentENAMEL OVERALL
fork_arm_thickness2.880 INCHES MINIMUM AND 2.940 INCHES MAXIMUM IN
securing_pin_hole_diameter1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-13048-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationTT-E-529,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_center_of_securing_pin_hole_to_rod_end6.000 INCHES NOMINAL IN
distance_from_pivot_pinhole_center_to_rod_connection_end6.000 INCHES NOMINAL IN
NSN5340-01-051-3609
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11660634 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 1.840 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 2.880 INCHES MINIMUM AND 2.940 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-E-529,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 1.620 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-13048-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: ENAMEL OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT5.840 INCHES NOMINAL IN
FORK SPAN WIDTH1.840 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER1.500 INCHES MINIMUM AND 1.505 INCHES MAXIMUM IN
FORK ARM THICKNESS2.880 INCHES MINIMUM AND 2.940 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONTT-E-529,CLASS A FED SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS1.620 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-13048-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTENAMEL OVERALL
MATERIALSTEEL OVERALL
DISTANCE FROM CENTER OF SECURING PIN HOLE TO ROD END6.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11660634?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11660634?
11660634 is a CLEVIS,ROD END.
What is the NSN for 11660634?
11660634 is cataloged in the U.S. Government catalog under NSN 5340-01-051-3609. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11660634

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.