PartsTable
Technical Data Sheet
Download PDF

11656968 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11656968: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 1.120 INCHES NOMINAL IN, second_leg_style: ANGLE, style_designator: ANGLE, second_leg_length: 1.500 INCHES NOMINAL IN, first_leg_thickness: 0.149 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-157-7702, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11656968
NSN: 5340-00-157-7702
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length1.120 INCHES NOMINAL IN
second_leg_styleANGLE
style_designatorANGLE
second_leg_length1.500 INCHES NOMINAL IN
first_leg_thickness0.149 INCHES NOMINAL IN
second_leg_end_width1.510 INCHES NOMINAL IN
second_leg_thickness0.149 INCHES NOMINAL IN
first_leg_hole_diameter0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
second_leg_hole_diameter0.870 INCHES NOMINAL IN
second_leg_hole_arrangement_styleONE HOLE
first_leg_distance_from_edge_to_hole_center_along_width3.880 INCHES NOMINAL IN
NSN5340-00-157-7702
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11656968 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.680 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.870 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 1.500 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.760 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG THICKNESS: 0.149 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.680 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.433 INCHES MINIMUM AND 0.453 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.870 INCHES NOMINAL IN
SECOND LEG LENGTH1.500 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.760 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
SECOND LEG THICKNESS0.149 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH3.880 INCHES NOMINAL IN
FIRST LEG THICKNESS0.149 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11656968?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11656968?
11656968 is a BRACKET,ANGLE.
What is the NSN for 11656968?
11656968 is cataloged in the U.S. Government catalog under NSN 5340-00-157-7702. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11656968

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.