The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, block_height: 1.740 INCHES NOMINAL1.740 INCHES NOMINAL IN, overall_width: 0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN, overall_length: 6.960 INCHES NOMINAL6.960 INCHES NOMINAL IN, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S)UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-070-3226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
11652726
NSN:5340-01-070-3226 FSC:5340 — Hardware, Commercial CAGE:19204 — ARMY, UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL JMTC (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061
block_height
1.740 INCHES NOMINAL1.740 INCHES NOMINAL IN
overall_width
0.750 INCHES NOMINAL0.750 INCHES NOMINAL IN
overall_length
6.960 INCHES NOMINAL6.960 INCHES NOMINAL IN
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)UNTHREADED HOLE(S)
surface_treatment
ENAMEL
clamping_hole_diameter
2.000 INCHES NOMINAL ALL HOLES IN
clamping_hole_quantity
11
mounting_hole_diameter
0.300 INCHES MINIMUM AND 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN
mounting_hole_quantity
11
end_item_identification
M109 HOWITZER FAMILYM109 HOWITZER FAMILY
NSN
5340-01-070-3226
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 11
•
CLAMPING HOLE QUANTITY: 11
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 5.500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE
•
BLOCK HEIGHT: 1.740 INCHES NOMINAL1.740 INCHES NOMINAL IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11,225/8,200/8;T6 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.300 INCHES MINIMUM AND 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
11
CLAMPING HOLE QUANTITY
11
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
5.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
TT-E-529 FED SPEC SINGLE TREATMENT RESPONSE
BLOCK HEIGHT
1.740 INCHES NOMINAL1.740 INCHES NOMINAL IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/11,225/8,200/8;T6 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.300 INCHES MINIMUM AND 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM0.320 INCHES MAXIMUM IN
OVERALL LENGTH
6.960 INCHES NOMINAL6.960 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
5.317 INCHES NOMINAL5.317 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11652726?
11652726 is a CLAMP,BLOCK,SECTION.
What is the NSN for 11652726?
11652726 is cataloged in the U.S. Government catalog under NSN 5340-01-070-3226. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.