PartsTable
Technical Data Sheet
Download PDF

11648492 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11648492: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_length: 1.094 INCHES NOMINAL IN, second_leg_style: SQUARE, second_leg_width: 1.500 INCHES NOMINAL IN, special_features: PAINTED OLIVE DRAB, style_designator: ANGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-689-3399, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11648492
NSN: 5340-00-689-3399
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_length1.094 INCHES NOMINAL IN
second_leg_styleSQUARE
second_leg_width1.500 INCHES NOMINAL IN
special_featuresPAINTED OLIVE DRAB
style_designatorANGLE
second_leg_length6.625 INCHES NOMINAL IN
first_leg_thickness0.125 INCHES NOMINAL IN
second_leg_thickness0.125 INCHES NOMINAL IN
second_leg_hole_diameter0.313 INCHES NOMINAL IN
second_leg_hole_arrangement_styleONE HOLE
second_leg_distance_from_edge_to_hole_center_along_width0.750 INCHES NOMINAL IN
NSN5340-00-689-3399
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11648492 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.313 INCHES NOMINAL IN
•
SECOND LEG WIDTH: 1.500 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 6.625 INCHES NOMINAL IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: ANGLE
•
SECOND LEG THICKNESS: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.625 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.313 INCHES NOMINAL IN
SECOND LEG WIDTH1.500 INCHES NOMINAL IN
SECOND LEG LENGTH6.625 INCHES NOMINAL IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.750 INCHES NOMINAL IN
STYLE DESIGNATORANGLE
SECOND LEG THICKNESS0.125 INCHES NOMINAL IN
FIRST LEG THICKNESS0.125 INCHES NOMINAL IN
FIRST LEG LENGTH1.094 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
CS-2300-0001-REV BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11648492?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11648492?
11648492 is a BRACKET,ANGLE.
What parts can replace 11648492?
There is 1 known substitute for 11648492: CS-2300-0001-REV B. Substitute compatibility should be verified for your specific system.
What is the NSN for 11648492?
11648492 is cataloged in the U.S. Government catalog under NSN 5340-00-689-3399. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11648492