PartsTable
Technical Data Sheet
Download PDF

11647006 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11647006: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include construction: SOLID, end_cut_angle: 45.0 DEGREES, overall_length: 99.940 INCHES MINIMUM AND 100.190 INCHES MAXIMUM IN, attachment_method: ROUND HOLE, fabrication_method: CELLULAR, UNEXPLODED, fsc_application_data: CAB COVER FIBERGLASS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-469-4994, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11647006
NSN: 5330-00-469-4994
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
constructionSOLID
end_cut_angle45.0 DEGREES
overall_length99.940 INCHES MINIMUM AND 100.190 INCHES MAXIMUM IN
attachment_methodROUND HOLE
fabrication_methodCELLULAR, UNEXPLODED
fsc_application_dataCAB COVER FIBERGLASS
special_test_featuresSUFFIX Z DUROMETER NOT TO EXCEED 70 AT MINUS 40 DEG F DEGF
end_item_identification2350-01-136-8744
attachment_hole_diameter0.656 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
attachment_feature_quantity6
smooth_finish_surface_locationSIDE
NSN5330-00-469-4994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11647006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.656 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
ATTACHMENT FEATURE QUANTITY: 6
•
FSC APPLICATION DATA: CAB COVER FIBERGLASS
•
SPECIAL TEST FEATURES: SUFFIX Z DUROMETER NOT TO EXCEED 70 AT MINUS 40 DEG F DEGF
•
END CUT ANGLE: 45.0 DEGREES
•
FABRICATION METHOD: CELLULAR, UNEXPLODED
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.656 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
ATTACHMENT FEATURE QUANTITY6
FSC APPLICATION DATACAB COVER FIBERGLASS
SPECIAL TEST FEATURESSUFFIX Z DUROMETER NOT TO EXCEED 70 AT MINUS 40 DEG F DEGF
OVERALL LENGTH99.940 INCHES MINIMUM AND 100.190 INCHES MAXIMUM IN
END CUT ANGLE45.0 DEGREES
END ITEM IDENTIFICATION2350-01-136-8744
FABRICATION METHODCELLULAR, UNEXPLODED
SMOOTH FINISH SURFACE LOCATIONSIDE
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11647006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11647006?
11647006 is a SEAL,NONMETALLIC STRIP.
What is the NSN for 11647006?
11647006 is cataloged in the U.S. Government catalog under NSN 5330-00-469-4994. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11647006