PartsTable
Technical Data Sheet
Download PDF

11636078 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11636078: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 4.240 INCHES NOMINAL IN, special_features: 6 INTERNAL EQUALLY SPACED SLOTS 0.160 IN. RADIUMS IN, bolt_circle_diameter: 3.750 INCHES NOMINAL IN, cross-sectional_thickness: 0.015 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, material_document_and_classification: MIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL.

This part is cataloged in the U.S. Government catalog under NSN 5330-00-423-1542, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11636078
NSN: 5330-00-423-1542
NIINs: 004231542, 014317642
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
outside_diameter4.240 INCHES NOMINAL IN
special_features6 INTERNAL EQUALLY SPACED SLOTS 0.160 IN. RADIUMS IN
bolt_circle_diameter3.750 INCHES NOMINAL IN
cross-sectional_thickness0.015 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-423-1542
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11636078 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.015 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 4.240 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.015 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803,+1253-A MIL SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER4.240 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.750 INCHES NOMINAL IN
SPECIAL FEATURES6 INTERNAL EQUALLY SPACED SLOTS 0.160 IN. RADIUMS IN
SUBSTITUTES & CROSS-REFERENCES 1
5330-423-1542Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 11636078?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11636078?
11636078 is a GASKET.
What parts can replace 11636078?
There is 1 known substitute for 11636078: 5330-423-1542. Substitute compatibility should be verified for your specific system.
What is the NSN for 11636078?
11636078 is cataloged in the U.S. Government catalog under NSN 5330-00-423-1542. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11636078