PartsTable
Technical Data Sheet
Download PDF

1163479-19 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1163479-19: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, outside_diameter: 17.233 INCHES NOMINAL IN, center_hole_diameter: 430.7 MILLIMETERS MINIMUM AND 431.3 MILLIMETERS MAXIMUM MM, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 3.4 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-024-8135, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1163479-19
NSN: 5331-01-024-8135
FSC: 5331 — O-ring
CAGE: 05824 — AEROJET ROCKETDYNE INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
outside_diameter17.233 INCHES NOMINAL IN
center_hole_diameter430.7 MILLIMETERS MINIMUM AND 431.3 MILLIMETERS MAXIMUM MM
elongation_percentage160 MAXIMUM
cross-sectional_height3.4 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM
NSN5331-01-024-8135
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1163479-19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 3.4 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM
•
OUTSIDE DIAMETER: 17.233 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CENTER HOLE DIAMETER: 430.7 MILLIMETERS MINIMUM AND 431.3 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT3.4 MILLIMETERS MINIMUM AND 3.7 MILLIMETERS MAXIMUM MM
OUTSIDE DIAMETER17.233 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
CENTER HOLE DIAMETER430.7 MILLIMETERS MINIMUM AND 431.3 MILLIMETERS MAXIMUM MM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 5
MS28775-283Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS568-283Reference document
Same NSN cross-reference
Reference document — Secondary reference
5331PL1291515Reference document
Same NSN cross-reference
Reference document — Informative reference only
AS568-283 MIL-P-25732Reference document
Same NSN cross-reference
Reference document — Secondary reference
MIL-P-25732Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 1163479-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1163479-19?
1163479-19 is a O-RING.
What parts can replace 1163479-19?
There are 5 known substitutes for 1163479-19: MS28775-283, AS568-283, 5331PL1291515 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1163479-19?
1163479-19 is cataloged in the U.S. Government catalog under NSN 5331-01-024-8135. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1163479-19