PartsTable
Technical Data Sheet
Download PDF

11629625-61 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11629625-61: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 429 OVERALL, head_style: DISHED HEXAGON, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_length: 1.084 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN, fastener_length: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN, hardness_rating: 33.0 ROCKWELL C MINIMUM AND 58.6 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-109-2002, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11629625-61
NSN: 5305-01-109-2002
FSC: 5305 — Screws
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 429 OVERALL
head_styleDISHED HEXAGON
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_length1.084 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
fastener_length1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
hardness_rating33.0 ROCKWELL C MINIMUM AND 58.6 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
width_between_flats0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
thread_series_designatorUNF
NSN5305-01-109-2002
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11629625-61 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.084 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
•
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 58.6 ROCKWELL C MAXIMUM OVERALL
•
HEAD STYLE: DISHED HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 150000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH1.188 INCHES MINIMUM AND 1.250 INCHES MAXIMUM IN
THREAD LENGTH1.084 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
HARDNESS RATING33.0 ROCKWELL C MINIMUM AND 58.6 ROCKWELL C MAXIMUM OVERALL
HEAD STYLEDISHED HEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH150000 POUNDS PER SQUARE INCH LBS
MINIMUM YIELD STRENGTH130000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL COMP 429 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
10087764Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11629625-61?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11629625-61?
11629625-61 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 11629625-61?
There is 1 known substitute for 11629625-61: 10087764. Substitute compatibility should be verified for your specific system.
What is the NSN for 11629625-61?
11629625-61 is cataloged in the U.S. Government catalog under NSN 5305-01-109-2002. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11629625-61

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.