PartsTable
Technical Data Sheet
Download PDF

11629625-12 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

11629625-12: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 429 OVERALL, head_style: HEXAGON, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.750 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM IN, fastener_length: 1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-109-2013, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11629625-12
NSN: 5305-01-109-2013
FSC: 5305 — Screws
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 429 OVERALL
head_styleHEXAGON
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
thread_class3A A
thread_length0.750 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM IN
fastener_length1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
special_featuresHEAD SHALL BE MARKED AS DESCRIBEDIN SAE J429.RAISED MARKINGS ARE PRE FERRED,DEPRESSIONS ARE ACCEPTABLE; SHALL MEET REQUIREMENTS FOR SURFACE DISCONTINUITIES AS SPECIFIED IN FF-S-85
thread_directionRIGHT-HAND
surface_treatmentOXIDE OVERALL
width_between_flats0.428 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
nominal_thread_diameter0.250 INCHES IN
minimum_tensile_strength5450 POUNDS PER SQUARE INCH LBS
NSN5305-01-109-2013
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 11629625-12 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-13924 MIL SPEC ALL TREATMENT RESPONSES OVERALL
•
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ429 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-13924 MIL SPEC ALL TREATMENT RESPONSES OVERALL
THREAD LENGTH0.750 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAEJ429 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.4375 INCHES MAXIMUM IN
SPECIAL FEATURESHEAD SHALL BE MARKED AS DESCRIBEDIN SAE J429.RAISED MARKINGS ARE PRE FERRED,DEPRESSIONS ARE ACCEPTABLE; SHALL MEET REQUIREMENTS FOR SURFACE DISCONTINUITIES AS SPECIFIED IN FF-S-85
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11629625-12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11629625-12?
11629625-12 is a SCREW,CAP,HEXAGON HEAD.
What is the NSN for 11629625-12?
11629625-12 is cataloged in the U.S. Government catalog under NSN 5305-01-109-2013. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11629625-12

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.