PartsTable
Technical Data Sheet
Download PDF

11629257 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11629257: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, hole_diameter: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.740 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN, overall_length: 4.010 INCHES MINIMUM AND 4.050 INCHES MAXIMUM IN, special_features: REV D AND ABOVE IS ASBESTOS FREE, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-187-3641, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11629257
NSN: 5330-01-187-3641
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
hole_diameter0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.740 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
overall_length4.010 INCHES MINIMUM AND 4.050 INCHES MAXIMUM IN
special_featuresREV D AND ABOVE IS ASBESTOS FREE
style_designatorNON-CIRCULAR
bolt_hole_quantity4
inside_corner_radius0.120 INCHES NOMINAL IN
outside_corner_radius0.020 INCHES NOMINAL IN
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-187-3641
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11629257 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.120 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.120 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH4.010 INCHES MINIMUM AND 4.050 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH1.740 INCHES MINIMUM AND 1.770 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
SPECIAL FEATURESREV D AND ABOVE IS ASBESTOS FREE
OUTSIDE CORNER RADIUS0.020 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11629257?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11629257?
11629257 is a GASKET.
What is the NSN for 11629257?
11629257 is cataloged in the U.S. Government catalog under NSN 5330-01-187-3641. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11629257