PartsTable
Technical Data Sheet
Download PDF

11628892 — PLUG,VENT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11628892: PLUG,VENT.

The PLUG,VENT is a the manufacturer industrial component. Key specifications include length: 0.640 INCHES NOMINAL IN, material: ALUMINUM ALLOY 6061, inside_diameter: 0.910 INCHES NOMINAL IN, vent_hole_shape: ROUND, outside_diameter: 1.110 INCHES NOMINAL IN, vent_hole_diameter: 0.245 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-109-4363, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11628892
NSN: 5340-01-109-4363
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
length0.640 INCHES NOMINAL IN
materialALUMINUM ALLOY 6061
inside_diameter0.910 INCHES NOMINAL IN
vent_hole_shapeROUND
outside_diameter1.110 INCHES NOMINAL IN
vent_hole_diameter0.245 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
vent_hole_quantity1
end_connection_typeUNTHREADED
material_document_and_classificationQQ-A-225/8, T6 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-109-4363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11628892 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
VENT HOLE DIAMETER: 0.245 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
•
LENGTH: 0.640 INCHES NOMINAL IN
•
VENT HOLE SHAPE: ROUND
•
END CONNECTION TYPE: UNTHREADED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8, T6 FED SPEC SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 1.110 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.910 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
VENT HOLE DIAMETER0.245 INCHES MINIMUM AND 0.256 INCHES MAXIMUM IN
LENGTH0.640 INCHES NOMINAL IN
VENT HOLE SHAPEROUND
END CONNECTION TYPEUNTHREADED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8, T6 FED SPEC SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER1.110 INCHES NOMINAL IN
INSIDE DIAMETER0.910 INCHES NOMINAL IN
MATERIALALUMINUM ALLOY 6061
VENT HOLE QUANTITY1
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11628892?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11628892?
11628892 is a PLUG,VENT.
What is the NSN for 11628892?
11628892 is cataloged in the U.S. Government catalog under NSN 5340-01-109-4363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11628892