PartsTable
Technical Data Sheet
Download PDF

11628218 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

11628218: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP W108 OVERALL, first_end_style: CHAMFERED, pin_overall_length: 0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN, pin_overall_diameter: 0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN, first_end_taper_angle: 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM, first_end_taper_length: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-109-1903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11628218
NSN: 5315-01-109-1903
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP W108 OVERALL
first_end_styleCHAMFERED
pin_overall_length0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
pin_overall_diameter0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
first_end_taper_angle4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
first_end_taper_length0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
NSN5315-01-109-1903
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 11628218 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
•
PIN OVERALL DIAMETER: 0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP W108 OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE4.0 DEGREES MINIMUM AND 12.0 DEGREES MAXIMUM
PIN OVERALL DIAMETER0.3751 INCHES MINIMUM AND 0.3753 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM IN
MATERIALSTEEL COMP W108 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11628218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11628218?
11628218 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for 11628218?
11628218 is cataloged in the U.S. Government catalog under NSN 5315-01-109-1903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11628218