PartsTable
Technical Data Sheet
Download PDF

11627514 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11627514: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.000 INCHES MINIMUM AND 2.040 INCHES MAXIMUM IN, overall_length: 2.180 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN, special_features: REV G AND ABOVE IS ASBESTOS FREE, style_designator: NON-CIRCULAR, aperture_diameter: 1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-124-5157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11627514
NSN: 5330-01-124-5157
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
hole_diameter0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.000 INCHES MINIMUM AND 2.040 INCHES MAXIMUM IN
overall_length2.180 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
special_featuresREV G AND ABOVE IS ASBESTOS FREE
style_designatorNON-CIRCULAR
aperture_diameter1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
bolt_hole_quantity4
cross-sectional_thickness0.016 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
outside_edge_to_bolt_hole_center_distance_along_width0.496 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
center_to_center_distance_between_bolt_holes_along_width1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-124-5157
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11627514 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.016 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.016 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH2.180 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.000 INCHES MINIMUM AND 2.040 INCHES MAXIMUM IN
APERTURE DIAMETER1.240 INCHES MINIMUM AND 1.280 INCHES MAXIMUM IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESREV G AND ABOVE IS ASBESTOS FREE
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
10086521Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11627514?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11627514?
11627514 is a GASKET.
What parts can replace 11627514?
There is 1 known substitute for 11627514: 10086521. Substitute compatibility should be verified for your specific system.
What is the NSN for 11627514?
11627514 is cataloged in the U.S. Government catalog under NSN 5330-01-124-5157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11627514

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.