PartsTable
Technical Data Sheet
Download PDF

11625310-1 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11625310-1: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP M1010 OR STEEL COMP M1025, first_leg_style: SQUARE, first_leg_width: 2.250 INCHES NOMINAL IN, first_leg_hole_diameter: 0.410 INCHES NOMINAL IN, second_leg_hole_diameter: 0.340 INCHES NOMINAL IN, first_leg_hole_arrangement_style: TWO HOLES. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-244-5890, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11625310-1
NSN: 5340-01-244-5890
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP M1010 OR STEEL COMP M1025
first_leg_styleSQUARE
first_leg_width2.250 INCHES NOMINAL IN
first_leg_hole_diameter0.410 INCHES NOMINAL IN
second_leg_hole_diameter0.340 INCHES NOMINAL IN
first_leg_hole_arrangement_styleTWO HOLES
second_leg_relationship_to_first_legNOT IDENTICAL
first_leg_distance_between_hole_centers_along_width2.000 INCHES NOMINAL IN
second_leg_distance_between_hole_centers_along_width0.780 INCHES NOMINAL IN
second_leg_distance_between_hole_centers_along_length0.410 INCHES NOMINAL IN
first_leg_distance_from_edge_to_hole_center_along_width0.440 INCHES NOMINAL IN
first_leg_distance_from_edge_to_hole_center_along_length0.500 INCHES NOMINAL IN
NSN5340-01-244-5890
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11625310-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.410 INCHES NOMINAL IN
•
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH: 2.000 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.340 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.810 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.500 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.410 INCHES NOMINAL IN
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH2.000 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.340 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.810 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.440 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11625310-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11625310-1?
11625310-1 is a BRACKET,ANGLE.
What is the NSN for 11625310-1?
11625310-1 is cataloged in the U.S. Government catalog under NSN 5340-01-244-5890. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11625310-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.