PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11625-5
11625-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.438 INCHES NOMINAL ALL HOLES IN, overall_width: 8.250 INCHES NOMINAL IN, aperture_diameter: 6.750 INCHES NOMINAL IN, bolt_circle_diameter: 7.500 INCHES NOMINAL IN, outside_corner_radius: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-191-7520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11625-5
NSN: 5330-01-191-7520
FSC: 5330
CAGE: 25567 — THE GORMAN-RUPP COMPANY DIV GORMAN-RUPP (USA)
SPECIFICATIONS
hole_diameter0.438 INCHES NOMINAL ALL HOLES IN
overall_width8.250 INCHES NOMINAL IN
aperture_diameter6.750 INCHES NOMINAL IN
bolt_hole_quantity6
bolt_circle_diameter7.500 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
side_radius_from_gasket_center3.625 INCHES NOMINAL IN
NSN5330-01-191-7520
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11625-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 6.750 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.438 INCHES NOMINAL ALL HOLES IN
•
BOLT HOLE QUANTITY: 6
•
SIDE RADIUS FROM GASKET CENTER: 3.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 7.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH8.250 INCHES NOMINAL IN
APERTURE DIAMETER6.750 INCHES NOMINAL IN
HOLE DIAMETER0.438 INCHES NOMINAL ALL HOLES IN
BOLT HOLE QUANTITY6
SIDE RADIUS FROM GASKET CENTER3.625 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER7.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
11625Interchangeable
interchangeable cross-reference
interchangeable
SC-D-70016-11Interchangeable
interchangeable cross-reference
interchangeable
SM-C-426566Interchangeable
interchangeable cross-reference
interchangeable
6103GA20000Interchangeable
interchangeable cross-reference
interchangeable
6103-GAInterchangeable
interchangeable cross-reference
interchangeable
42033-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11625-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11625-5?
11625-5 is a GASKET.
What parts can replace 11625-5?
There are 16 known substitutes for 11625-5: 11625, SC-D-70016-11, SM-C-426566 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11625-5?
11625-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-191-7520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11625-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026