PartsTable
Technical Data Sheet
Download PDF

11617079 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11617079: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include overall_width: 3.625 INCHES NOMINAL IN, overall_length: 4.875 INCHES NOMINAL IN, special_features: FOUR 0.313 IN. BY 0.500 IN.

SIZE SLOTS,LOCATED AS PER REPLIES TO PACS ADUY AND ADUZ IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION, material_document_and_classification: MIL-A-17472 MIL SPEC ALL MATERIAL RESPONSES OVERALL. This part is cataloged in the U.S. Government catalog under NSN 5330-00-464-4762, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11617079
NSN: 5330-00-464-4762
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
overall_width3.625 INCHES NOMINAL IN
overall_length4.875 INCHES NOMINAL IN
special_featuresFOUR 0.313 IN. BY 0.500 IN. SIZE SLOTS,LOCATED AS PER REPLIES TO PACS ADUY AND ADUZ IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-A-17472 MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.313 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.563 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-464-4762
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11617079 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-A-17472 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-A-17472 MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH4.875 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.625 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
SPECIAL FEATURESFOUR 0.313 IN. BY 0.500 IN. SIZE SLOTS,LOCATED AS PER REPLIES TO PACS ADUY AND ADUZ IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.563 INCHES NOMINAL IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.313 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11617079?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11617079?
11617079 is a GASKET.
What is the NSN for 11617079?
11617079 is cataloged in the U.S. Government catalog under NSN 5330-00-464-4762. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11617079

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.