PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 11616-2

11616-2 — Storage Datasheet

✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

The SHEET FEEDER,PRINTER is a the manufacturer industrial component. Key specifications include height: 0.125 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, tip_type: MALE HEXAGONAL, head_style: UNDERCUT UNIVERSAL, overall_length: 11.160 INCHES NOMINAL IN, first_end_style: RADIUS. This part is cataloged in the Federal Logistics Information System under NSN 5315-00-383-9260, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 11616-2
NSN: 5315-00-383-9260
FSC: 5315
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
height0.125 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
tip_typeMALE HEXAGONAL
head_styleUNDERCUT UNIVERSAL
overall_length11.160 INCHES NOMINAL IN
first_end_styleRADIUS
drive_shank_typeMALE STRAIGHT ROUND CENTER, FLATTED ON TWO SIDES
special_featuresBALL END
style_designatorSHOULDER
features_providedMANUAL TOOL
first_step_length0.031 INCHES NOMINAL IN
pin_head_diameter0.406 INCHES NOMINAL IN
NSN5315-00-383-9260
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K 11616-2 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 11616-2 MFR OEM
KEY FEATURES
•
UNDER HEAD LENGTH: 0.234 INCHES NOMINAL IN
•
PIN HEAD DIAMETER: 0.406 INCHES NOMINAL IN
•
SECOND STEP LENGTH: 0.094 INCHES NOMINAL IN
•
HEIGHT: 0.125 INCHES NOMINAL IN
•
THIRD STEP DIAMETER: 0.261 INCHES NOMINAL IN
•
FIRST END STYLE: RADIUS
•
FIRST STEP LENGTH: 0.031 INCHES NOMINAL IN
•
SECOND STEP DIAMETER: 0.275 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
UNDER HEAD LENGTH0.234 INCHES NOMINAL IN
PIN HEAD DIAMETER0.406 INCHES NOMINAL IN
SECOND STEP LENGTH0.094 INCHES NOMINAL IN
HEIGHT0.125 INCHES NOMINAL IN
THIRD STEP DIAMETER0.261 INCHES NOMINAL IN
FIRST END STYLERADIUS
FIRST STEP LENGTH0.031 INCHES NOMINAL IN
SECOND STEP DIAMETER0.275 INCHES NOMINAL IN
THIRD STEP LENGTH0.109 INCHES NOMINAL IN
HEAD STYLEUNDERCUT UNIVERSAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
18750-15InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
673033InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
307ND5059InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
218-21671-3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
852802InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
48331InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11616-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11616-2?
11616-2 is a SHEET FEEDER,PRINTER. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 11616-2?
There are 17 known substitutes for 11616-2: 18750-15, 673033, 307ND5059 and 14 more. Substitute compatibility should be verified for your specific system.
Is 11616-2 still available?
11616-2 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11616-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026