PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11610324
11610324 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.250 INCHES NOMINAL IN, outside_diameter: 1.878 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.878 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.125 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-167-8208, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11610324
NSN: 5330-00-167-8208
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.250 INCHES NOMINAL IN
outside_diameter1.878 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.878 INCHES NOMINAL IN
accommodated_shaft_diameter1.125 INCHES NOMINAL IN
NSN5330-00-167-8208
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11610324 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOUSING BORE DIAMETER: 1.878 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 1.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
SEAL WIDTH: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
OUTSIDE DIAMETER: 1.878 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOUSING BORE DIAMETER1.878 INCHES NOMINAL IN
ACCOMMODATED SHAFT DIAMETER1.125 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
SEAL WIDTH0.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
OUTSIDE DIAMETER1.878 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
11-223Interchangeable
interchangeable cross-reference
interchangeable
B94.9 6-32 UNC HS G H1Interchangeable
interchangeable cross-reference
interchangeable
1003600Interchangeable
interchangeable cross-reference
interchangeable
118400Interchangeable
interchangeable cross-reference
interchangeable
NA13471Interchangeable
interchangeable cross-reference
interchangeable
EE11223Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11610324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11610324?
11610324 is a SEAL,PLAIN.
What parts can replace 11610324?
There are 18 known substitutes for 11610324: 11-223, B94.9 6-32 UNC HS G H1, 1003600 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11610324?
11610324 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-167-8208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11610324

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026