MOTOR,WINDSHIELD WIPER,ELECTRIC. Key specifications include switch: NOT INCLUDED, design_type: OSCILLATING ARM, mounting_method: BRACKET(S) AND SCREW, voltage_in_volts: 12.0, throw_angle_in_deg: 110.0, mounting_hole_spacing: 165MM MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5306-00-182-2016, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| switch | NOT INCLUDED |
| design_type | OSCILLATING ARM |
| mounting_method | BRACKET(S) AND SCREW |
| voltage_in_volts | 12.0 |
| throw_angle_in_deg | 110.0 |
| mounting_hole_spacing | 165MM MM |
| actuating_shaft_length | 63.5 MILLIMETERS NOMINAL MM |
| mounting_hole_diameter | 4.7625 MILLIMETERS NOMINAL MM |
| mounting_hole_quantity | 2 |
| manual_operation_facility | NOT PROVIDED |
| mounting_hole_thread_provision | UNTHREADED |
| actuating_shaft_largest_diameter | 15.875 MILLIMETERS NOMINAL MM |
| NSN | 5306-00-182-2016 |
| HEAD HEIGHT | 0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH LBS |
| THREAD DIRECTION | RIGHT-HAND |
| FASTENER LENGTH | 0.656 INCHES NOMINAL IN |
| FEATURES PROVIDED | FINISHED HEAD |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD LENGTH | 0.468 INCHES MINIMUM IN |
| WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN |
| THREAD QUANTITY PER INCH | 28 |
| MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL |