PartsTable
Technical Data Sheet
11607302 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SOLID, fabrication_method: SOLID, cross-sectional_width: 0.970 INCHES NOMINAL IN, cross-sectional_height: 0.590 INCHES NOMINAL IN, material_document_and_classification: ASTM D2000 4AA615ABC1F2G ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-340-3637, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11607302
NSN: 5330-00-340-3637
FSC: 5330
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSOLID
fabrication_methodSOLID
cross-sectional_width0.970 INCHES NOMINAL IN
cross-sectional_height0.590 INCHES NOMINAL IN
material_document_and_classificationASTM D2000 4AA615ABC1F2G ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-340-3637
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11607302 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 4AA615ABC1F2G ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL WIDTH: 0.970 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT: 0.590 INCHES NOMINAL IN
FABRICATION METHOD: SOLID
CONSTRUCTION: SOLID
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 4AA615ABC1F2G ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL WIDTH0.970 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.590 INCHES NOMINAL IN
FABRICATION METHODSOLID
CONSTRUCTIONSOLID
MATERIALRUBBER SYNTHETIC OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
9610Interchangeable
interchangeable cross-reference
interchangeable
3B90031-107Interchangeable
interchangeable cross-reference
interchangeable
PEI 6730Interchangeable
interchangeable cross-reference
interchangeable
310NPInterchangeable
interchangeable cross-reference
interchangeable
FW2502Interchangeable
interchangeable cross-reference
interchangeable
Z9610X1BInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11607302?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11607302?
11607302 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What parts can replace 11607302?
There are 25 known substitutes for 11607302: 9610, 3B90031-107, PEI 6730 and 22 more. Substitute compatibility should be verified for your specific system.
Is 11607302 still available?
11607302 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11607302