PartsTable
Technical Data Sheet
Download PDF

11605377 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11605377: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, overall_width: 3.000 INCHES MINIMUM AND 3.031 INCHES MAXIMUM IN, aperture_width: 2.250 INCHES MINIMUM AND 2.281 INCHES MAXIMUM IN, overall_length: 8.281 INCHES MINIMUM AND 8.312 INCHES MAXIMUM IN, aperture_length: 7.531 INCHES MINIMUM AND 7.562 INCHES MAXIMUM IN, inside_corner_radius: 0.062 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-990-9144, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11605377
NSN: 5330-00-990-9144
FSC: 5330 — Packing and Gasket Materials
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
overall_width3.000 INCHES MINIMUM AND 3.031 INCHES MAXIMUM IN
aperture_width2.250 INCHES MINIMUM AND 2.281 INCHES MAXIMUM IN
overall_length8.281 INCHES MINIMUM AND 8.312 INCHES MAXIMUM IN
aperture_length7.531 INCHES MINIMUM AND 7.562 INCHES MAXIMUM IN
inside_corner_radius0.062 INCHES NOMINAL IN
outside_corner_radius0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
cross-sectional_thickness0.188 INCHES NOMINAL IN
material_document_and_classificationMIL-STD-670,TY S,CL SC,STY E,GR 11 F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-990-9144
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11605377 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.188 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-STD-670,TY S,CL SC,STY E,GR 11 F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE WIDTH: 2.250 INCHES MINIMUM AND 2.281 INCHES MAXIMUM IN
•
APERTURE LENGTH: 7.531 INCHES MINIMUM AND 7.562 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.188 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-STD-670,TY S,CL SC,STY E,GR 11 F2 MIL STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH8.281 INCHES MINIMUM AND 8.312 INCHES MAXIMUM IN
OVERALL WIDTH3.000 INCHES MINIMUM AND 3.031 INCHES MAXIMUM IN
APERTURE WIDTH2.250 INCHES MINIMUM AND 2.281 INCHES MAXIMUM IN
APERTURE LENGTH7.531 INCHES MINIMUM AND 7.562 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 11605377?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11605377?
11605377 is a GASKET.
What is the NSN for 11605377?
11605377 is cataloged in the U.S. Government catalog under NSN 5330-00-990-9144. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11605377