PartsTable
Technical Data Sheet
Download PDF

11602349 — MOUNT,RESILIENT,UTILITY

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

11602349: MOUNT,RESILIENT,UTILITY.

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include height: 1.000 INCHES NOMINAL IN, material: STEEL CORE, inside_diameter: 2.060 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN, major_outside_diameter: 3.687 INCHES MINIMUM AND 3.719 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-051-3444, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11602349
NSN: 5340-01-051-3444
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
height1.000 INCHES NOMINAL IN
materialSTEEL CORE
inside_diameter2.060 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN
major_outside_diameter3.687 INCHES MINIMUM AND 3.719 INCHES MAXIMUM IN
material_document_and_classificationASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A675 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A513 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A519 ASSN STD SINGLE MATERIAL RESPONSE CORE
NSN5340-01-051-3444
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11602349 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A675 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A513 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A519 ASSN STD SINGLE MATERIAL RESPONSE CORE
•
INSIDE DIAMETER: 2.060 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN
•
HEIGHT: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL CORE
•
MAJOR OUTSIDE DIAMETER: 3.687 INCHES MINIMUM AND 3.719 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A575 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A675 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A513 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A519 ASSN STD SINGLE MATERIAL RESPONSE CORE
INSIDE DIAMETER2.060 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN
HEIGHT1.000 INCHES NOMINAL IN
MATERIALSTEEL CORE
MAJOR OUTSIDE DIAMETER3.687 INCHES MINIMUM AND 3.719 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 11602349?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11602349?
11602349 is a MOUNT,RESILIENT,UTILITY.
What is the NSN for 11602349?
11602349 is cataloged in the U.S. Government catalog under NSN 5340-01-051-3444. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11602349