PartsTable
Technical Data Sheet
Download PDF

1160-01-437-1-2 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1160-01-437-1-2: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY SPRING, seal_width: 0.115 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 1.435 INCHES NOMINAL IN, accommodated_shaft_diameter: 1.187 INCHES NOMINAL IN, cross-sectional_shape_style: C-SECTION W/ FLAT SPRING. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-587-2661, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1160-01-437-1-2
NSN: 5330-00-587-2661
FSC: 5330 — Packing and Gasket Materials
CAGE: 05939 — SAINT-GOBAIN PERFORMANCE PLASTICS CORPORATION DIV OMNISEAL SOLUTIONS (USA)
SPECIFICATIONS
materialNICKEL ALLOY SPRING
seal_width0.115 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter1.435 INCHES NOMINAL IN
accommodated_shaft_diameter1.187 INCHES NOMINAL IN
cross-sectional_shape_styleC-SECTION W/ FLAT SPRING
NSN5330-00-587-2661
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1160-01-437-1-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.115 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.435 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: C-SECTION W/ FLAT SPRING
•
ACCOMMODATED SHAFT DIAMETER: 1.187 INCHES NOMINAL IN
•
MATERIAL: NICKEL ALLOY SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.115 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.435 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEC-SECTION W/ FLAT SPRING
ACCOMMODATED SHAFT DIAMETER1.187 INCHES NOMINAL IN
MATERIALNICKEL ALLOY SPRING
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
7780002-124Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1160-01-437-1-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1160-01-437-1-2?
1160-01-437-1-2 is a SEAL,PLAIN.
What parts can replace 1160-01-437-1-2?
There is 1 known substitute for 1160-01-437-1-2: 7780002-124. Substitute compatibility should be verified for your specific system.
What is the NSN for 1160-01-437-1-2?
1160-01-437-1-2 is cataloged in the U.S. Government catalog under NSN 5330-00-587-2661. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1160-01-437-1-2