PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 116-4-4
116-4-4 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Wallet to hold 32 CDs/DVDs ,- Incl. high-quality, antistatic sleeves ,- Incl. carrying strap ,- Material: 600D nylon with zigzag look.

Key specifications include material: STEEL CORROSION RESISTING SEAT, body_style: SCREW-IN CARTRIDGE, valve_size: 1.250 INCHES IN, document_type: ENGINEERING DRAWING, connection_type: UNTHREADED EXTERNAL PIPE FIRST END, document_source: 03476. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-658-0612, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
116-4-4
NSN: 5340-00-658-0612
FSC: 5340
CAGE: 54261 — FREUND PRECISION INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING SEAT
body_styleSCREW-IN CARTRIDGE
valve_size1.250 INCHES IN
document_typeENGINEERING DRAWING
connection_typeUNTHREADED EXTERNAL PIPE FIRST END
document_source03476
connection_styleGROOVED (PIPE) FIRST END
special_featuresALL O-RING SEALS SHALL BE MADE OF NITRILE MATERIAL COMPOUND FOR LOW TERPERATURE OPERATION IAW MIL-P-83461 OR MIL-P-25732
mounting_facilityEXTERNAL THREAD
surface_treatmentPAINT OUTSIDE
component_quantity3
mating_end_quantity1
NSN5340-00-658-0612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 116-4-4 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
11644Interchangeable
interchangeable cross-reference
interchangeable
NEW PRODUCTInterchangeable
interchangeable cross-reference
interchangeable
3000 BLACK IDInterchangeable
interchangeable cross-reference
interchangeable
12448736-1Interchangeable
interchangeable cross-reference
interchangeable
RCSK 16887Interchangeable
interchangeable cross-reference
interchangeable
RCSK16887-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 116-4-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 116-4-4?
116-4-4 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Hama.
What parts can replace 116-4-4?
There are 10 known substitutes for 116-4-4: 11644, NEW PRODUCT, 3000 BLACK ID and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 116-4-4?
116-4-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-658-0612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 116-4-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026