PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11595303
11595303 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: RUBBER, design_type: FRICTION, overall_diameter: 3.080 INCHES NOMINAL IN, inside_diameter_length: 0.840 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH, tube_outside_diameter_for_which_designed: 3.000 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-082-1874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11595303
NSN: 5340-00-082-1874
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialRUBBER
design_typeFRICTION
overall_diameter3.080 INCHES NOMINAL IN
inside_diameter_length0.840 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed3.000 INCHES NOMINAL IN
NSN5340-00-082-1874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11595303 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
INSIDE DIAMETER LENGTH: 0.840 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 3.000 INCHES NOMINAL IN
•
MATERIAL: RUBBER
•
OVERALL DIAMETER: 3.080 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
DESIGN TYPEFRICTION
INSIDE DIAMETER LENGTH0.840 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED3.000 INCHES NOMINAL IN
MATERIALRUBBER
OVERALL DIAMETER3.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
X1548CInterchangeable
interchangeable cross-reference
interchangeable
231B3716Interchangeable
interchangeable cross-reference
interchangeable
1JA2597-1Interchangeable
interchangeable cross-reference
interchangeable
1159303Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11595303?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11595303?
11595303 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace 11595303?
There are 4 known substitutes for 11595303: X1548C, 231B3716, 1JA2597-1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11595303?
11595303 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-082-1874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11595303

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026