PartsTable
Technical Data Sheet
Download PDF

115915-1 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

115915-1: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.149 INCHES NOMINAL IN, material: STEEL COMP 301 BAND, overall_width: 0.750 INCHES NOMINAL IN, surface_treatment: PASSIVATE BAND, material_thickness: 0.020 INCHES NOMINAL IN, loop_inside_diameter: 0.492 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-081-4005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
115915-1
NSN: 5340-00-081-4005
FSC: 5340 — Hardware, Commercial
CAGE: 38200 — DRS TECHNOLOGIES CANADA LTD (CAN)
SPECIFICATIONS
diameter0.149 INCHES NOMINAL IN
materialSTEEL COMP 301 BAND
overall_width0.750 INCHES NOMINAL IN
surface_treatmentPASSIVATE BAND
material_thickness0.020 INCHES NOMINAL IN
loop_inside_diameter0.492 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
NSN5340-00-081-4005
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 115915-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.149 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE BAND
•
MATERIAL: STEEL COMP 301 BAND
•
LOOP INSIDE DIAMETER: 0.492 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BAND
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.149 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE BAND
MATERIALSTEEL COMP 301 BAND
LOOP INSIDE DIAMETER0.492 INCHES MINIMUM AND 0.498 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 115915-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 115915-1?
115915-1 is a CLAMP,LOOP.
What is the NSN for 115915-1?
115915-1 is cataloged in the U.S. Government catalog under NSN 5340-00-081-4005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 115915-1